Security Settings - Philips CT9A9U/CBOSA8ID Manual

The IP number has to be supported by your network
operator before you can make an IP call. When you
change a new SIM card, the IP number you have
stored will be cleared. The phone does not validate the
IP number you have entered. Therefore, please ensure
that the numbers are correct.
Black list
This menu displays the list of contacts whose calls will
be rejected. You can select to set the Status. To add the
corresponding number to the list, select and enter the
Black List Number
then confirm by saving it.
You cannot add a name to the blacklist directly from
the Phonebook, the Calls list and the SMS Inbox.

Security Settings

SIM Lock
This menu allows you to set the PIN code
The default setting is Off. If set to On, you have to
enter your PIN code when switching your phone on.
If the enter the wrong PIN code, you will not be able
to use most of the features in this phone. Press , to
activate. Make sure that you have entered the correct
PIN code before you can enable this feature.
38
Phone Lock
This menu allows you to set a password for your
phone. The default setting is Off. Once you have set
Phone Lock, you must enter the password each time
you switch on your phone.
Enter the password and press L. If Phone Lock is
currently Off, the status will change to
The default phone lock code is 1122.
Fixed Dial
This menu allows you to restrict your outgoing calls.
You need to enter PIN2 code, which has to be
supplied / supported by your network operator.
Mode
Fixed Dial
On or Off. List
Not all SIM cards support PIN2 code. If your SIM card
does not have a PIN2 code, this option is not available.
On
There are two modes:
numbers stored in the Fixed Dial List) and
Off
(you can dial any number).
Displays the fixed dial list. Press L Add,
enter the name and phone number, then
press L, enter PIN2 code and press L.
On
and vice-versa.
(you only dial the
Settings