Table of Contents
Advertisement
Change name
Allows you to change the name of the selected WAP profile. Press
Change name
enter the name of your choice and press
Bearer
Allows you to select the type of network used when launching WAP.
Bearer
GSM
GPRS
GPRS first
L
GSM settings
GSM settings
Allows you to change the GMS settings.
Gateway
Phone number
GSM
Your mobile will only use the GSM network for WAP connections.
,
Press
to confirm.
GPRS
Your mobile will only use the GPRS network for WAP connections.
,
Press
to confirm.
GPRS first
Your mobile will first try to connect to the GPRS network, then to
the GSM network if the GPRS network isn't available when launching
,
WAP. Press
to confirm your choice.
Selecting this option requires you also configure the GSM settings (see
below).
Gateway
Allows you to enter the IP address and port number (subscription
dependent) for the gateway: select
enter the IP Address and press
L
Port information: 9203 for a secure connection; 9201 for a non-
secure connection.
Phone Number
Allows you to enter the phone number needed to establish a
connection with your WAP Service Provider (ISP). Select:
-
ISDN Nber
to enter an ISDN ISP number, OR
-
Analogic Nber
to enter an analogic number.
Enter the "+" sign followed by the number provided by your operator.
L
Only enter one number in one of the two fields. To know what type of
number you should enter, contact your operator.
+
to confirm.
Gateway
and press
,
.
WAP services
,
,
,
, then
77
Advertisement
Table of Contents
