Switching On The Phone - Philips CT6608-000APMEA Manual

Insert the SIM card
Slide the SIM card holder to unlock it and then lift it
up on its hinge (1). Remove the SIM card from its
protective holder and (2) place it in the space
provided, making sure that the clipped corner of the
card is in the correct corner and that the gold contacts
are facing down.
Close the card holder and slide it into the locked
position.
Slide the battery back into its slot, gold contacts
downwards, until it stops. Then lock it by pushing it
downwards. Replace the back cover by sliding it into
its slots until it stops.
6
Remove the protective film covering the screen and
the camera lens before using the phone.

Switching on the phone

To switch on the phone, long-press the ) key. Enter
the PIN code if required. A PIN code is a 4- to 8-digit
secret code for your SIM card. It is preconfigured and
communicated to you by your operator or retailer. For
more information on PIN codes, see "Security" on
page 44.
If you enter an incorrect PIN code three times, your
SIM card will be blocked. To unblock it, you must
request the PUK code from your operator.
When you switch on your mobile phone with your
new SIM for the first time, you will be asked for the
following:
To set the current date.
Set date
To set the current time.
Set time
To select your time zone.
Time zone
See "Settings" on page 43 for details on these three
items.
Getting Started