Philips 55OLED889 User Manual page 19

Analogue Channels or Only Digital Channels and
press OK.
9 - Select Start and press OK to reinstall channels. This
can take a few minutes.
10 - Press  (left) to go back one step or press  Back to
close the menu.
Factory reset
You can redo a full TV installation. The TV is completely
reinstalled.
To redo a full TV installation:
1 - Select  Settings > System > About > Reset >
Factory reset and press OK.
2 - Enter your PIN code if necessary.
3 - The TV will reinstall completely. All settings will be
reset and installed channels will be replaced. The
installation can take a few minutes.
4 - Press  (left) to go back one step or press  Back to
close the menu.
DVB Settings
DVB-T or DVB-C Reception
During the channel installation, just before you search
for channels, you selected Antenna (DVB-T) or Cable
(DVB-C). Antenna DVB-T searches for terrestrial analogue
channels and digital DVB-T/T2 channels. Cable DVB-C
searches for analogue and digital channels available
from a cable DVB-C operator.
DVB-C Channel Installation
For ease of use, all DVB-C settings are set to automatic.
If your DVB-C operator gave you specific DVB-C values,
the network ID or network frequency, enter these values
when the TV asks for them during installation.
Channel Number Conflicts
In some countries, different TV channels (broadcasters)
might have the same channel number. While installing,
the TV shows the list with channel number conflicts. You
need to select which TV channel you want to install on a
channel number with multiple TV channels.
Network Frequency Mode
If you intend to use the fast Quick Scan method
in Frequency Scan to search for channels,
select Automatic. The TV will use 1 of the predefined
network frequencies (or HC - homing channel) as used by
most cable operator in your country.
If you received a specific network frequency value to
search for channels, select Manual.
Network Frequency
With the Network Frequency Mode set to Manual, you
can enter the network frequency value received from
your cable operator here. To enter the value, use the
number keys.
Frequency Scan
Select the method of searching for channels. You can
select the faster Quick Scan method and use the
predefined settings used by most cable operator in your
country.
If this results in having no channels installed or if some
channels are missing, you can select the extended Full
Scan method. This method will take more time to search
for and install channels.
Frequency Step Size
The TV searches for channels in steps of 8 MHz.
If this results in having no channels installed or if some
channels are missing, you can search in smaller steps of 1
MHz. Using the 1MHz steps will take more time to search
for and install channels.
Digital Channels
If you know your cable operator is not offering digital
channels, you can skip searching for digital channels.
Analogue Channels
If you know your cable operator is not offering analogue
channels, you can skip searching for analogue channels.
Free / Scrambled
If you have a subscription and a CAM - Conditional
Access Module for pay TV services, select Free +
Scrambled. If you did not subscribe to pay TV channels or
services, you can select Free Channels Only.
For more information, in Help, press the colour
key Keywords and look up CAM, Conditional Access

Module.
19