Roger Beep (End Transmission Tone); Alarm Function (Emergency); Vox - Midland G18 Instruction Manual

Roger Beep (End transmission tone)

When the PTT button is released, the radio will beep to confirm to other
users that your transmission has ended and speech can begin.
The Roger Beep can be enabled through the programming software.

Alarm function (Emergency)

*Enabled via Programmable Software
By pressing the Emergency button, the radio will switch to Alarm
Emergency mode.
G18 will switch to transmission for 30 seconds by generating a
sound alarm, then for further 30 seconds will remain in TX to allow the
user to communicate his status.
At the end, the radio will switch to receive. If needed, the Emergency call can
be repeated.

VOX

The VOX feature enables hands free conversations without using PTT.
Just speak in the direction of the microphone and the communication
will automatically activate.
The VOX sensitivity can be adjusted in 10 different levels (0,1,2,3...9)
through the Menu or programming software :
OFF means that the VOX is turned off. Level 1 is set by default and has
the lowest VOX sensitivity. 9 is the highest one.
To activate the VOX levels, follow these steps:
1. Press the MENU button;
2. Turn the Encoder knob until the display shows "VOX";
3. Press the ENT key;
4. Turn the Encoder knob again and select the desired VOX level:
1= low sensitivity; 9= highest sensitivity.
5. Confirm your selection with the ENT key.
7 |
8