www.zyxel.com
Appendix 8. Flash Card Size Recovery
If you are upgrading the firmware from 1.0x to 2.0x, it is possible to have flash card being
recognized as 128 MB. You can use below CLI command to check the flash card size.
Router(config)# show disk
No. Disk
==================================================================
1 image
2 onboard flash
The sum of image size and onboard flash size should be around 230 MB. To recover the flash
card size, you will need to have firmware recovery with the SOP described in appendix 7.
Size(MB)
Usage
67
81%
163
39%
139/142