Audio - Axis P9117-PV User Manual

AXIS P9117–PV Corner Camera
Configure your device
Create a rule:
1. Go to System > Events and add a rule.
2. Type a name for the rule.
3. In the list of conditions, under Audio, select Audio Detection.
4. In the list of actions, under Recordings, select Record video.
5. In the list of storage options, select SD_DISK.
6. Select the stream profile where audio has been turned on.
7. Set the prebuffer time to 5 seconds.
8. Set the postbuffer time to 2 minutes.
9. Click Save.

Audio

Add audio to your recording
Turn on audio:
1. Go to Video > Stream > Audio and include audio.
2. If the device has more than one input source, select the correct one in Source.
3. Go to Audio > Device settings and turn on the correct input source.
4. If you make any changes to the input source, click Apply changes.
Edit the stream profile that is used for the recording:
5. Go to System > Stream profiles and select the stream profile.
6. Select Include audio and turn it on.
7. Click Save.
Add audio capability to your product using portcast
With portcast technology, you can add audio capability to your product. It allows audio and I/O communication digitally over the
network cable between the camera and the interface.
To add audio capability to your Axis network video device, connect the portcast compatible Axis audio device and I/O Interface
between your device and the PoE switch which provides power.
1. Connect the Axis network video device (1) and the Axis portcast device (2) with a PoE cable.
2. Connect the Axis portcast device (2) and the PoE switch (3) with a PoE cable.
1
Axis network video device
15