Setting A Programme; Setting Additional Functions; Setting Timer Programming; Starting The Programme - Siemens SN13EW79CS Information For Use

Table of Contents

Advertisement

The Eco 50° programme is espe-
cially environmentally friendly and
ideal for normally soiled tableware.
It is the most efficient programme
for the combination of energy/wa-
ter consumption for this type of
tableware and evidences conform-
ity with the EU Ecodesign Direct-
ive.
If you do not perform any actions
on the appliance for 10 minutes,
the appliance will automatically
switch off.
14.2 Setting a programme
To adjust the washing programme to
the soiling level of the tableware, se-
lect a suitable programme.
Press the programme button re-
peatedly until the right programme
has been selected.
a The programme is set and the LED
flashes.
14.3 Setting additional func-
tions
You can set additional functions to
complete the washing programme
selected.
Note: The additional functions which
can be used depend on the pro-
gramme selected.
Keep pressing the button for addi-
tional functions until the appropri-
ate additional function is set.
→ "Additional functions", Page 20
a The additional function is set and
the LED flashes.
14.4 Setting timer program-
ming
You can delay the start of the pro-
gramme via the Home Connect app.
Open the Home Connect app and
select the appliance.
You can delay the start of the pro-
gramme under Operation.
14.5 Starting the programme
Press
.
a The LED on the door handle lights
up during the programme.
a The programme has ended when
no indicators on the controls light
up.
a When the LED on the door handle
is no longer lit, the programme has
ended.
Notes
¡ If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as
a handle for the top basket. You
might touch the partially dissolved
tablet.
¡ You can only change a pro-
gramme when running if you can-
cel it.
→ "Terminate programme",
Page 34
¡ The appliance switches off auto-
matically 1 minute after the end of
the programme to save energy. If
you open the appliance door im-
mediately after the programme has
ended, the appliance will switch off
after 4 seconds.
14.6 Interrupting programme
Note: When you open the appliance
door once the appliance has heated
up, leave the door slightly ajar for a
few minutes and then close it. This
operation en
33

Advertisement

Table of Contents
loading

Table of Contents