Specifications - Makita DUH551 Instruction Manual

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Indicator lamps
5. Check button
6. Battery indicator
7. Knob
8. Housing
9. Switch trigger B
10. Switch trigger A
11. Lock-off button
12. Adjusting dial
13. Cutting height

SPECIFICATIONS

Blade length
Strokes per minute (min
Overall length
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
*1: Weight without any accessories or battery cartridge(s)
*2: The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Recommended cord connected power source
Battery adapter
Cord connected battery pack
Portable power pack
• The cord connected power source(s) listed above may not be available depending on your region of residence.
• Before using the cord connected power source, read instruction and cautionary markings on them.
Explanation of general view
14. 10 cm
15. Trimming direction
16. Hedge surface to be trimmed
17. Tilt the blades
18. Press
19. Chip receiver
20. Nut
21. Shear blade
22. Branch catcher
23. Hooks
24. Fit the hooks into groove
25. Grooves
26. Press the levers on both sides
Model
-1
)
*1
*2
DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF/DC18SH/DC18WC
DUH551
550 mm
1,065 mm
3.9 kg
4.6 - 5.3 kg
BL1815N/BL1820B/BL1830B/BL1840B/BL1850B/BL1860B
PDC01 / PDC1200 / PDC1500
27. Unlock the hooks
28. Blade cover
29. Screws
30. Under cover
31. Plate
32. Crank
33. Oval hole of shear blade
34. Limit mark
35. Holder cap cover
36. Slotted screwdriver
37. Brush holder cap
1,000 - 1,800
D.C.36V
BAP182
BL36120A
DUH651
650 mm
1,135 mm
4.0 kg
4.7 - 5.4 kg
7