ZyXEL Communications PLA-401 Quick Start Manual page 4

2 Connecting the PLA-401 to a
Computer
1 Use an Ethernet cable to connect the ETHERNET port on
the PLA-401 to the Ethernet port on your computer.
2 Plug the PLA-401 into a power outlet.
3 The
or blinking.
4 When the PLA-401 detects a connection to another PLA-
401 (or another HomePlug AV compatible power line
adapter), the
traffic.
If the
outlet.
LED should be on and the
LEDs turn on and blink when there is
LED is not on, try using another power
ENGLISH
3
LED should be on