Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Harbor Freight Tools Manuals
  4. Wood Router
  5. dril master 68341
  6. Owner's manual & safety instructions

Harbor Freight Tools dril master 68341 Owner's Manual & Safety Instructions

11 amp fixed base router
Hide thumbs

Advertisement

Quick Links

Download this manual
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual (or month and year of purchase if product has no number). Keep this manual and the
receipt in a safe and dry place for future reference.
11 AMP Fixed
Base Router
email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
24c
68341

Advertisement

loading

Related Manuals for Harbor Freight Tools dril master 68341

Summary of Contents for Harbor Freight Tools dril master 68341

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.

  • Page 2: Table Of Contents

    table of contents Safety ............2 Operation ............ 7 Specifications ..........6 Maintenance ..........11 Setup ............7 Warranty ............ 12 WarninG SyMBOLS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

  • Page 3: Safety

    b. avoid body contact with earthed or h. Do not let familiarity gained from frequent grounded surfaces, such as pipes, use of tools allow you to become radiators, ranges and refrigerators. complacent and ignore tool safety There is an increased risk of electric shock principles.
  • Page 4 If unreadable or missing, contact circulation to the hand, past hand injuries, Harbor Freight Tools for a replacement. nervous system disorders, diabetes, or c. Let bit cool before touching, changing Raynaud’s Disease should not use this tool.
  • Page 5 k. To reduce vibration, maintain the tool as explained in this manual. If any abnormal vibration occurs, stop use immediately. Grounding tO preVent eLectric SHOcK anD DeatH FrOM incOrrect GrOunDinG Wire cOnnectiOn: check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded.

  • Page 6: Specifications

    extension cords 1. Grounded tools require a three wire extension cord. 7. Make sure the extension cord is properly wired Double Insulated tools can use either and in good electrical condition. Always replace a two or three wire extension cord. a damaged extension cord or have it repaired by a qualified electrician before using it.

  • Page 7: Setup

    Setup - Before use: read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Functions power Switch Depth Scale ring Handle Handle collet nut Operating instructions read the entire iMpOrtant SaFety inFOrMatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
  • Page 8 note: Insert shank end into Collet as far as 2. Unlock the Lock Lever. it will go, then pull up slightly so there is a minimum 1/16″ gap at bottom of bit. 5. Insert Bit: a. 1/2" - Insert 1/2" Bit into Collet and tighten Collet Nut with Wrenches.
  • Page 9 adjusting the cutting Depth 1. Place Router on workpiece. Unlock the Lock Lever. 3. Turn Depth Scale Ring until the “0” aligns with index line on Main Housing. Each line on scale raises or lowers bit by 1/64″. index Line Lock Lever 2.
  • Page 10 General Operating instructions note: Use two or more passes for deep cuts, 8. The bit rotates clockwise. Adjust especially in the case of hardwood. Do not attempt for this while cutting: to cut deeper than 5/8″ in a single pass. Turn a.

  • Page 11: Maintenance

    Maintenance and Servicing instructions procedures not specifically explained in this manual must be performed only by a qualified technician. tO preVent SeriOuS inJury FrOM acciDentaL OperatiOn: Make sure that the trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section.

  • Page 12: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.