Myride Only); Bolt (3/8 X 1 Inch); Locknut (3/8 Inch) - Toro TimeCutter 79682 Manual

4
Installing the Pod Brackets
and Seat Belt
Machines without MyRide Only
Parts needed for this procedure:
1 Seat belt tongue assembly
1 Seat belt buckle assembly
2 Carriage screw (7/16 x 1 inch)
2 Locknut (7/16 inch)
2 Seat belt bracket (machines without MyRide only)
4

Bolt (3/8 x 1 inch)

4

Locknut (3/8 inch)

1 Left pod bracket
1 Right pod bracket (machines without MyRide only)
4 Thread-forming screw (5/16 x 3/4 inch)
Procedure
1. Install the seat belt buckle and tongue to the
inside of the seat belt brackets with 2 carriage
screws (7/16 x 1 inch) and 2 locknuts (7/16 inch)
as shown in Figure
1. Carriage screw (7/16 x 1
inch)
2. Seat belt bracket
3. Buckle
8
9.
Figure 9
4. Locknuts (7/16 inch)
5. Tongue assembly
g316016