Status Page - ZyXEL Communications P-793H Quick Start Manual

Look at the LEDs
• The POWER LED blinks green while your P-793H starts up and stays on when it is ready.
• The DSL1 and DSL2 LEDs blink while the P-793H is trying to establish a connection with
the ISP and stay on when the connection is established.
• Each LAN LED stays on if the corresponding ETHERNET port is properly connected and
blinks when there is traffic.
If any of these LEDs are off, check your connections, and inspect your
cables for damage. If the LEDs are still off, contact your local vendor.

2 Status Page

Use the Status screen to view basic setup information.
1 Open your Internet browser, and enter
http://192.168.1.1.
If you cannot access the web configurator, make sure you allow pop-up
windows and JavaScripts and set up Java permissions appropriately. See
the User's Guide for more information and further troubleshooting tips.
Make sure your computer's IP address is in the same subnet as the P-
793H's LAN IP address.
2 Enter the password user to go directly
to the Status screen.
P-793H Quick Start Guide
3