Package Information; Changing The Illumination Lamp; Electrical Conection - Blomberg BRFB1046 Series User Manual

Package information

• Packing materials of The product are manufactured from
recyclable materials in accordance with our National
Environment Regulations.Do not dispose of the packaging
materials together with the domestic or other wastes.
Take them to the packaging material collection points
designated by the local authorities.
Connecting the water line to the water supply
(*Depend on model)
• Connect the water line to a water supply valve.
If a valve is not present or you are not sure, consult
a quali ed plumber.
Connecting the water hose to the refrigerator
(*Depend on model)
1. Slip the union (B) on to the water hose (A)
2. Push the water hose downwards rmly to slip it onto the
water inlet valve (C).
3.Tighten the union (C) by hand to ecure it onto the water
inlet valve.Normally, you are not required to tighten the
union with a tool.However, you can use a wrench or pliers
to tighten the union if there is a leakage.
WARNING:
water supply only.
WARNING:
Water Only.

Changing the illumination lamp

To change the Bulb/LED used for illumination of your
refrigerator, call your Authorized Service. The lamp(s) used in
this appliance is not suitable for house hold room illumination.
The intended purpose of this lamp is to assist the user to place
food items in the refrigerator/freezer in a safe and comfortable
way. The lamps used in this appliance have to withstand extreme
physical conditions such as temperatures below -4 °F.
Connect to potable
Fill With Potable
DANGER:
refrigerant used. do not use mechanical devices to
defrost refrigerator. Do not puncture refrigerant
tubing.
CAUTION :
Flammable refrigerant used. Consult repair
manual/owner's guide before attempting to
service this product. All safety precautions
must be followed.
CAUTION :
Dispose of properly in accordance with federal
or local regulations. Flammable refrigerant
used.
CAUTION :
puncture of refrigerant tubing; Follow
handling instructions carefully. Flammable
refrigerant used.
Electrical connection
WARNING:
conection via extension cable or
multi-plus.
WARNING:
cable must be replaced by the
Authorized Service Agent.
If two coolers are to be installed
side by side there should be at
1.5 inches distance between
them.
• Our company shall not be liable for any damages that will
arise when the pro duct is used eith out grounding and
electrical connection in accorddance with the national
regulations.
• Power cable plug must be with in easy reach after installation.
• Do not extension cords or cordless multi outlet between
your product and the wall outlet.
Hot Surface Warning !
Side wall of your product is equipped
with refrigerant pipes to improve the
cooling system. Refrigerant with high
areas, resualting in hot surfaces on the
side wall this is normal and does not
need any servicing.Plase pay attention
while touching these area.
6 EN
Risk of re or explosion Flammable
Risk of re or explosion.
Risk of re or explosion.
Risk of re or explosion due to
Do not make
Damaged power