Sony clie PEG-N610C Operating Instructions Manual page 115

Performing a local HotSync
If a message stating that the selected COM port is not available is
displayed
Follow the procedures below. If the same message appears again, uninstall
the Palm Desktop for CLIE software and then re-install it.
1
Click the HotSync
(bottom-right corner of the taskbar).
A shortcut menu is displayed.
2
Make sure that Local USB is selected.
If it is selected, click Local USB to clear it.
Notes
• Do not remove your CLIE handheld from the cradle during a HotSync operation.
• Do not press the HotSync button during a HotSync operation. It might cause errors
and force the operation to quit.
• Do not enter power saving mode during a HotSync operation. If your computer
enters power saving mode during a HotSync operation, the HotSync Manager will be
forced to quit.
To change the user name
1
In the Palm™ Desktop for CLIE window, click Users from the
Tools menu.
The Users dialog box is displayed.
2
Click the user name you want to change in the list box and
then click Rename.
The Rename User dialog box is displayed.
3
Enter a new user name and then click OK.
Your CLIE handheld user name is changed at the next HotSync operation.
Chapter3
Exchanging and updating data using a HotSync
®
operation with the cradle
icon in the Windows
®
operation
®
task tray
115