Electrical Connection; Attaching The Plastic Wedges - Beko B5RCNA405HMG User Manual

Installation

4.3. Electrical Connection

WARNING:
A
Do not make connections via
extension cables or multi-plugs
WARNING:
Damaged power cable must
B
be replaced by the Authorized
Service Agent.
If two coolers are to be
installed side by side, there
C
should be at least 4 cm
distance between them.
•
Our company shall not be liable
for any damages that will arise when
the product is used without grounding
and electrical connection in accordance
with the national regulations.
•
Power cable plug must be within easy
reach after installation.
•
Do not extension cords or cordless
multiple outlets between your product
and the wall outlet.
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant pipes
to improve the cooling system.
Refrigerant with high
A
temperatures may flow through
these areas, resulting in hot
surfaces on the side walls. This
is normal and does not need any
servicing. Please pay attention
while touching these areas.
Refrigerator / User Manual

4.4. Attaching the plastic wedges

Use the plastic wedges in the provided
with the product to provide sufficient space
for air circulation between the product and
the wall.
1. To attach the wedges, remove the
screws on the product and use the
screws provided with the wedges.
2. Attach 2 plastic wedges on the
ventilation cover as shown in the
figure.
11 / 20 EN