Disassembly For Repair - Kenwood KAC-8070 Service Manual

DISASSEMBLY FOR REPAIR
Remove the 7 screws on the bottom plate @ ).
Remove the bottom plate in the direction of the arrow
(@).
Remove the 2 screws on the front panel (@).
Remove the front panel in the direction of the arrow
(@).
Remove the 3 screws on the rear panel and holder
(@).
Pull out the rear panel in the direction of the arrow
(@).
Remove the 5 screws on the heat sink (@).
Remove the 4 screws on the transistor mounting
hardware (@).
Remove the 2 screws on the frame (@).
Raise the PC board and rear panel and turn them in
the direction of the arrow to remove from heat sink
(@). The pattern side of the PC board faces up.
ee A TR UH