Table of Contents
Advertisement
l
Provide adequate drainage.
Tilt unit
toward
outside so
unit drains
to the rear.
cup,
l
Provide additional support for unit
if required.
Support frame
l
Provide adequate clearance so the air filter
can be removed from the bottom of the
front panel.
remove air filter
Electrical
requirements
Check the model and serial number label to
determine the electrical requirements
of your
unit. ALL units must use a time delay fuse or
circuit breaker.
Grounding
method
Your air conditioner
is equipped with a
power supply cord containing a 3-prong
grounding plug. To minimize possible
electrical shock hazard, the power supply
cord must be plugged into a mating 3-prong,
grounding-type
wall receptacle, which is
grounded in accordance with all applicable
codes. If a mating wall receptacle is not
available, it is the personal responsibility
and
obligation of the customer to have a properly
grounded 3-prong wall receptacle installed
by a qualified electrician.
Power
supply
DO NOT disconnect the air conditioner from
its electrical supply. DO NOT use an electri-
cal outlet that can be turned off with a
switch.
17
Advertisement
Table of Contents
