How to Adjust the Rotating Phase of the
Gear, Main Cam
1) Push down the hooking catch of the CHAS. MECH, and remove
the TRAY.
2) Align the arrow mark of the Gear, Main Cam with the black round
mark of the CHAS, MECHA as shown below.
3) Confirm that the Slide, Mech Cam is located in the right position,
then insert the TRAY gently.
Caution: If the rotating phase of the Gear, Main Cam is
incorrectly adjusted, the chucking operation and tray
movement will have malfunction.
GEAR, MAIN CAW
SLIDE, MECHA CAM
Align the arrow > mark with the black
A
round ¢ mark.
GEAR, RELAY
GEAR, TRAY RELAY MK2
GEAR, TRAY