Table of Contents
Advertisement
Installation
STEP 5 Power on
Plug the power cord into a wall socket protected by a fuse or circuit breaker. Then, press Power to turn on
the washing machine.
STEP 6 Calibration Mode
Your Samsung washing machine detects the laundry weight automatically.
For more accurate weight detection, please run Calibration Mode after the installation.
To run Calibration Mode, follow these steps:
1. Remove laundry or any contents in the machine.
2. Press and hold Water Level and Delay End simultaneously for at least 3 seconds when the power is
turned on.
3. Press Start/Pause to activate Calibration Mode.
4. The pulsator rotates clockwise and anticlockwise approximately 1 minute.
5. When Calibration Mode is finished, "0" appears on the display, and the washing machine automatically
turns off. The washing machine is now ready for use.
Environment
Please dispose of the packaging materials for this product in an "environmentally friendly" manner. For
further detail, please contact your local area authority.
18
English
Untitled-5 18
CAUTION
Do not run the drain hose under the bottom of the
machine.
2023-05-16( )
6:06:23
Advertisement
Table of Contents
