Inseming He Tapes And: Cong Chon Aca Sccsijcisschesd Citheeaticscsansurnactennmireteigmeasgeasedieseienionetabeaaeh - Panasonic EASA-PHONE KX-T2740 Operating Instructions Manual

@OGM Recording (REC) Button : It is used to record an OGM.
@lIn use, Answer, Power Indicator.
@HOLD Button : It is used to put the calling party on hold during a conversation.
@Line Buttons and Indicators.
CONF (Conference) Button : It is used for 3 way conversation.
@TIME/DAY CHECK Button : It is used for the announcement of day and time.
@PREDIAL Button : It is used to confirm the phone number before dialing.
@)AUTO/STORE Button : It is used to put store and dial telephone numbers for one-touch/speed dialing.
@PAUSE Button : It is used to pause when programming on a PBX, or accessing an outside line or a
computer-accessed long distance service.
(QFLASH Button : It is used for call waiting service and to access some of the features of your PBX.
(DREDIAL Button : It is used to redial the last dialed phone number.
GOMUTE Button and indicator.
@)SP-PHONE (Speakerphone) Button and Indicator.
@Rewind Button (REW) : It is used to rewind the ICM tape.
(Fast Forward Button (FF) : It is used to fast foward the ICM tape.
G@GOGM Select Button : It is used to select the desired OGM.
(MEMO/2 WAY Button : The button serves for MEMO recording or 2 WAY conversation recording.
(TRANSFER OGM Button : It is used to select transfer OGM.
Q9ANS SYSTEM ON/OFF Button.
POWER FAILURE LINE SELECTOR : This switch serves to select the line to be used when a power
failure occurs.
@)LINE MODE SELECTOR : Normaly the line mode selector is set to A. Set it to B when your unit is
connected to a PBX.
@dTelephone Jack. (L1 or L1/L2)
@)Telephone Jack. (L2)
@)DC Jack.
@OGM PLAY Button : It is used to play the OGM.
@ICM ERASE Button : It is used to erase the ICM.
@PPLAYBACK/PAUSE Button : It is used to play or stop the recorded ICM.
@®New Message (PB) Button : It is used to play the new messages.
@)TRANSFER Button. This button is used to transfer ICMs.
GDRINGER Volume Selector LINE 2.
GDRINGER Volume Selector LINE 1.
G2CLEAR Button : This button serves to delete commands while storing phone number into memory.
@)DIALING MODE Selector.
@DHYPHEN Button : While entering memories.
@)VOLUME CONTROL : It is used to select the desired volume level.
G®SECRET Button : While entering memories.
GNLOWER Button.
PROGRAM
Button : It is used to program telephone numbers and other functions.
G9Microphone (MIC).
Telephone jack to connect the handset cord.
MANS. LINE SELECTOR. This switch serves to select the OGM's for each line.
@LINE-OGM MODE Selector : This switch serves to select the line for incoming calls.
see ee OGM (Outgoing Message) ICM (Incoming Message)
tape (MC30) ----- One tape (MC30) -----
v
= @
as)
)
Le 4
»
a
°
S