Cleaning And Maintenance - Acer Electric Scooter 3 Series User Manual

• Always keep both hands on the handlebar or you risk serious injury
due to loss of balance and falls.
• Only for use in dry weather.
• We do not recommend the use on public roads.
• Never turn violently when driving fast.
• Do not start or stop suddenly.
• Make sure the speed of the electric scooter is safe for you and
others and be ready to stop at any time while it is running.
• When driving the electric scooter, please stay at a distance from
others to avoid collisions.
• When you turn you must use the center of gravity of your body; the
violent change in the center of gravity can cause damage.
• No other alterations are allowed except for the modifications
specified by the manufacturer.
• Self-locking nuts and other self-locking fasteners may fail.
• Avoid riding on slopes.
XIII. CLEANING AND
MAINTENANCE
This electric scooter can be used as a means of transport and as such
requires maintenance of all its components, which suffer wear and tear
due to the use of the same and is not covered by the warranty.
CLEANING
Make sure the electric scooter is powered OFF, the charge cable
is unplugged, and the rubber cap on the charge port is tightly
sealed before cleaning; otherwise you may damage the electronic
components. Always disconnect the product from the charger first,
cover the charging waterproof plug, turn off the power of the product,
and avoid fluid contact with the battery, motor and other electronic
parts during cleaning to avoid unforeseen hazard. Do not use a high
pressure water jet to clean the product or soak it in water.
To clean the electric scooter, use a damp cloth. If you need to scrape
dirt, use a soft brush and then a damp cloth.
Be sure to cover the charging port to avoid problems with the electronic
components.
Do not use alcohol, gasoline, kerosene or other volatile or corrosive
chemical components. This can damage both the appearance and the
internal structure of the electric scooter. Also, do not use a pressure
water gun or running water.
CONSERVATION
Store the electric scooter in a cool, dry environment when not in use.
Avoid leaving it outside, since it is not manufactured for use in wet
areas, near corrosive agents such as seawater, ports, etc. It is also
not recommended to expose it to high temperatures caused by direct
sunlight for a long time.
EN-12