Disassembly & Reassembly - Samsung LTP227W Service Manual

3 Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the
LTP227W monitor.
WARNING: This monitor contains electrostatically sensitive devices. Use caution when handling
these components.
3-1 Disassembly
Cautions : 1. Disconnect the monitor from the power source before disassembly.
2. Follow these directions carefully; never use metal instruments to pry apart the cabinet.
3. R/Cover opening jig : BH81-00001A
LTP227W
A/V INPUT
SPEAKER
IR
FUNCTION
SPEAKER
1. Loacte the monitor on the cushioned table
with face down. Remove the stand from
LCD-TV and pull the stand cover.
2. Remove 2 screws from the rear cover and
remove rear cover by using opening jig.
3. Lift up the rear cover and disconnect function
cable, A/V Input cable, IR cable and speaker
cable from the shield. (See illustrations)
4. Remove 2 screws (A/V Input Board) from the
shield. Please add a circle around the 6 screw
that connects the silver shield of the Main-PCB
to the Panel shield.(see illustrations)
5. Lift up main shield and remove 17 screws from
the set (Main Board and Panel Shield).
(see illustrations)
3-1