Advertisement
4-3-2 How to Check the Version of the Program
1. Procedures for checking in the Factory Menu.
When entering Factory Mode, the version of the software is displayed at the bottom of the menu as described on page 4-17.
Panel ON Time(Hour) 0002
1. Calibration
2. Option Table
3. White Balance
4. SVP-UX
5. Option Block
6. SGTV5810/NTP3000
T-CALMPEUH-xxxx (Main Micom Ver)
T-BDPMPEUS-xxxx
BORD2_CALLA_TR-xxxx (TR Ver)
Month / Day / Year / Hour / Min. / Sec.
Samsung Electronics
C4A_RMA
7. YC Delay
8. Adjust
9. I2C Check
10. W/B MOVIE
11. Checksum
12. Reset
13. Spread Specturm
S/W Version
Troubleshooting
4-33
Advertisement
