LG W081CA SG2 Service Manual page 9

1.5.2 COOLING ONLY MODEL WITH REMOTE CONTROL AND TOUCH TYPE
DISPLAY REMOTE CONTROL
Precaution:
The Remote Control unit will not function properly if strong light strikes the sensor window of the air
conditioner or if there are obstacles between the Remote Control unit and the air conditioner.
f_\
POWER BUTTON
To turn the air conditioner ON, push the button. To turn the air conditioner OFF, push the button again.
This button takes priority over any other buttons.
2
1 OPERATION MODE SELECTION BUTTON
— Every time you push this button, it will toggle COOL, FAN and DRY.
31 ON/OFF TIMER BUTTON
—I Everytime you push this betton, timer is set as follows.(1 Hours -*2Hours-* 3Hours-* 4Hours-* 5Hours-* 6Hours-*
7Hours-» 8Hours-* 9Hours-» lOHours-* 11 Hours-* 12Hours-» Cancel)
4\
FAN SPEED SELECTOR
—1 Everytime you push this button, it is set as follows.
S\
( High [F3] -* Low[F /] -* Medfc1]-* High[f3]...
ROOM TEMPERATURE SETTING BUTTON
This button can automatically control the temperature of the room.
The temperature can be set within a range of 16"C to 30°C by 1 °C or within a ran
Select the lower number for lower temperature of the room.
ff]
ENERGY SAVER
The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will tern on and check the room
Z\
AUTO SWING
This button can automatically control the air flow direction.
g
SLEEP MODE BUTTON
— Press the sleep mode button to set the time you want the unit to turn off
hour increment by pressing the button. Every time you push this buttoi
2Hours -* 3Hours -» 4Hours -* 5Hours -* 6Hours -* 7Hours -* OHour
Note: The
Sleep Mode will be operated at low fan speed for quiet sleeping
over the next 30 minutes and by 2°C in 1 hour for comfortble sleepy
9\
REMOCON SIGNAL RECEIVER
—
9
—