LG FDV1110 Series Owner's Manual page 41

Symptoms
Appliance runs
and pauses by
itself after the
drying cycle
finishes.
Performance
Symptoms
Clothes take too
long to dry.
This is how the anti crease option works.
• Make sure that the anti crease option has been set. The
option is designed to prevent creases that are formed when
the clothes are not unloaded promptly after the drying
cycle. When the option is set, the appliance runs for 10
seconds and pauses for 5 minutes. The option is works for
up to 2 hours.
Load is not properly sorted.
• Separate heavy items from lightweight items. Larger and
heavier items take longer to dry. Light items in a load with
heavy items can fool the sensor because the light items dry
faster.
Large load of heavy fabrics.
• Heavy fabrics take longer to dry because they tend to retain
more moisture. To help reduce and maintain more
consistent drying times for large and heavy fabrics,
separate these items into smaller loads of a consistent size.
Appliance controls are not set properly.
• Use the appropriate control settings for the type of load
you are drying. Some loads may require an adjustment of
the dry level setting for proper drying.
Lint filter needs to be cleaned.
• Remove the lint from the lint filter after every cycle. With the
lint removed, hold the lint filter up to a light to see if it is
dirty or clogged. With some loads that produce high
amounts of lint, such as new bath towels, it may be
necessary to pause the cycle and clean the filter during the
cycle.
Before Calling for Service
Possible Cause & Solution
Possible Cause & Solution
41