Epson MovieMate 50 User Manual page 23

After you connect your equipment to MovieMate, follow these steps to begin:
1. Connect the power cords and plug in all the equipment.
2. Open the lens cover and press the
3. Press the button on MovieMate or on the remote control.
4. When you see the menu, use the down-arrow or up-arrow button to select the correct
source, then press
■
If you used the component video connection, select
■
Otherwise, select
5. Turn on the power to the connected video equipment, then start playing the video or
game.
6. Normally, MovieMate selects the correct aspect ratio automatically. If you need to change
the aspect, press the
(if available for the video source you're using). (Make sure the toggle switch on the
remote control is set to the
button on MovieMate or on the remote control.
.
.
Video
button on the remote control and select
position.)
Func.-
Component
Normal
Using Epson MovieMate with Other Equipment
.
, , or
Full Zoom
23