Using The Hidden Buttons; Function; Output Specifications For The Different Sound Effect Modes - Samsung HW-Q910D User Manual

‒ The menu is activated only when the Surround Speakers are connected.
‒ This mode is automatically turned off and becomes unavailable when the Q-symphony function turns on.
• Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz,
2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between -6 to +6 using the Up/
Down buttons.
(Make sure the Sound mode is set to "Standard".)
• If the video on the TV and audio from the Soundbar are not synchronized, select Sync in Sound Control, and then set the audio delay between
0~300 milliseconds by using the Up/Down buttons.
• Sync is only supported for some functions.
• The Virtual Speaker function can be turned ON/OFF by using the Up/Down buttons.
Using the Hidden Buttons (Buttons with more than one function)
Remote Control Button
WOOFER (Up)
Up
(Sound Control)
(Source)

Output specifications for the different sound effect modes

<HW-Q910D>
Effect
Standard
Surround
Game Pro
Adaptive Sound
Hidden Button

Function

TV remote control On/Off (Standby)
7 Band EQ
Voice Feedback On/Off (Standby)
Input
2.0 ch
5.1 ch
7.1 ch
Dolby Atmos®, DTS:X
2.0 ch
5.1 ch
7.1 ch
Dolby Atmos®, DTS:X
2.0 ch
5.1 ch
7.1 ch
Dolby Atmos®, DTS:X
2.0 ch
5.1 ch
7.1 ch
Dolby Atmos®, DTS:X
ENG - 8
ID SET
Reference page
page 10
page 12
page 7
page 6
Output
With Subwoofer & Surround Speaker
2.1 ch
5.1 ch / 7.1 ch (DTS)
7.1 ch
7.1.2 ch
9.1.2 ch
9.1.2 ch
9.1.2 ch
9.1.2 ch
9.1.2 ch
9.1.2 ch
9.1.2 ch
9.1.2 ch
9.1.2 ch
9.1.2 ch
9.1.2 ch
9.1.2 ch