Table of Contents
Advertisement
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable and Wi-Fi card cable from the system board and disconnect Wi-
Fi antenna cable from Wi-Fi card.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Figure 28. Disconnect the battery pack and Wi-Fi card cable
Step 2.
Remove one screw and then remove the Wi-Fi card.
Figure 29. Remove one screw and the Wi-Fi card
Screw specifications (for 14–inch and 17–inch
models)
M2 x L2.8
Number of screws
1
.
Chapter 4
Removing a FRU or CRU
45
Advertisement
Table of Contents
