INSTALLATION
12
Removing the Fridge and
Freezer Door
If your entrance door is too narrow for the
appliance to pass through, remove the appliance
doors and pass the appliance laterally.
WARNING
• Disconnect the power cord, house fuse or circuit
breaker before installing, removing the doors, or
cleaning the appliance. Failure to follow these
instructions may result in death, fire or electric
shock.
Removing the Freezer Door
1
Remove the hinge cover
2
Disconnect the wire harness
grounding screw
c
using a socket wrench and lift off the top hinge.
Set parts aside.
CAUTION
• When lifting the hinge free of the latch, be
careful that the door does not fall forward. It is
.
a
. Remove the
b
. Remove the three bolts
recommended that two or more people carry
out the door removal and refitting.
3
Lift the freezer door until it is free of the
bottom hinge assembly.
CAUTION
• Place the door on a non-scratching surface with
the inner side facing up.
Removing the Fridge Door
The steps to remove the fridge door are similar to
the freezer door, so you could just follow the steps
above to remove the fridge door.
CAUTION
• When lifting the hinge free of the hinge lever
d
latch, be careful that the door does not fall
forward. It is recommended that two or more
people carry out the door removal and refitting.
• Place the door on a non-scratching surface with
the inner side facing up.
NOTE
• The number of wire harnesses may vary
depending on the model.