Guaranteed Sound Power Level - Ryobi RY36LMX46A Original Instructions Manual

Hide thumbs Also See for RY36LMX46A:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
SYMBOLS
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Wear ear protection. Wear eye
protection.
Do not operate the product on inclines
greater than 15°. Mow across the face of
slopes, never up and down.
Do not expose the product to rain or
damp conditions.
Beware of sharp blades. Blades continue
to rotate after the motor is switched
off . Remove the battery pack before
maintenance.
Beware of thrown or fl ying objects.
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area.
Go
Stop

Guaranteed sound power level

Do not dispose of waste batteries, waste
electrical and electronic equipment
as unsorted municipal waste. Waste
batteries and waste electrical and
electronic equipment must be collected
separately. Waste batteries, waste
accumulators, and light sources have to
be removed from the equipment. Check
with your local authority or retailer for
recycling advice and collection point.
According to local regulations, retailers
may have an obligation to take back
waste batteries and waste electrical and
electronic equipment free of charge.
Your contribution to the reuse and
recycling of waste batteries and waste
electrical and electronic equipment
helps to reduce the demand of raw
materials. Waste batteries, in particular
containing lithium, and waste electrical
and electronic equipment contain
valuable and recyclable materials, which
can adversely impact the environment
and the human health if not disposed
of in an environmentally compatible
manner. Delete personal data from waste
equipment, if any.
INTERFACE BOARD OVERVIEW
The interface board displays the status and condition of the
product.
1
10
9
8
7
6
1. High load - indicates that the load is too high for the
current setting and the product might stall. Switch to
power mode, increase cutting height, or reduce walking
speed.
2. Catch/Mulch indicator - indicates that the grass catcher
or mulching plug is not installed. The product does
not start without the grass catcher or mulching plug
attached.
3. Battery charge status button - powers up the battery
level indicator when pressed.
4. Battery level indicator - indicates the amount of charge
left in the battery packs.
If only one LED lights up, the battery pack capacity
is lower than 25%.
If two LEDs light up, the battery pack capacity is
between 25% and 50%.
If three LEDs light up, the battery pack capacity is
between 50% and 75%.
If four LEDs light up, the battery pack is fully
charged. The battery pack capacity is between 75%
and 100%.
5. Blade check indicator - indicates that the blade must be
checked. Replace the dull blade to keep the product in
good working condition. After checking or replacing the
blade, press the battery charge status button for more
than 5 seconds. The indicator turns off and the blade
check function resets.
6. Overload indicator - indicates that the product is
overloaded and that the blade may be jammed.
7. Mode button - changes the cutting mode of the product
when pressed.
8. Power mode - indicates that the blade is at high speed
for heavy grass cutting.
9. Smart mode - indicates that the mower is able to adjust
the blade speed depending on the load on the product
for general cutting.
10. Eco mode - indicates that the blade is at low speed for
thin grass cutting.
2
3
5
4
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ry36lmxsp46aRy36lmxsp46a-150

Table of Contents