Outdoor Cabinet to a solidly anchored and supported pole from the back of the cabinet. Model PDN-4300-F1-600 is for a cabinet without a battery pedestal and PDN-4300-F1-610 is for a cabinet with a battery pedestal. See the figures on the following pages for details.
Page 2
Pole Mounting Kits for the 4300 6U Outdoor Cabinet Installation Instructions Pole Mounting – Cabinet without Pedestal Use this procedure to mount the cabinet on a 6 to 8 inch diameter pole. See the figure below for a cabinet mounting illustration.
Page 3
One 9/16” wrench Two 15/16” wrenches A pencil Model PDN-4300-F1-600 Pole Mounting Kit Follow this procedure for pole mounting: 1. Pre-assemble the upper and lower horizontal brackets to the vertical bracket as shown in the above Figure. 2. Select a convenient mounting location on the pole.
Page 4
For mounting heights less than 7’ above grade, excess bolt length may need to cut off in order to prevent a hazardous protrusion. Lifting eyelets are provided to facilitate hoisting if desired. Pole Mounting – Cabinet with Pedestal Figure B - Pole Mounting Diagram (Cabinet with Pedestal) November 2005 4300-A2-ZZ49-00...
Page 5
Two 15/16” wrenches One 3/4” wrench A pencil Model PDN-4300-F1-610 Pole Mounting Kit Follow this procedure for pole mounting: 1. Pre-assemble the upper and lower horizontal brackets (items 6 and 36) to the vertical bracket (item 3) as shown in the above Figure.
Page 6
For mounting heights less than 7’ above grade, excess bolt length may need to cut off in order to prevent a hazardous protrusion. Lifting eyelets are provided to facilitate hoisting if desired. November 2005 4300-A2-ZZ49-00...
Service Requirements If the product malfunctions, all repairs must be performed by the manufacturer or a Zhone-authorized agent. It is the responsibility of users requiring service to report the need for service to GSS.
Page 8
Pole Mounting Kits for the 4300 6U Outdoor Cabinet Installation Instructions *4300-A2-ZZ49-00* *4300-A2-ZZ49-00* November 2005 4300-A2-ZZ49-00...