Peavey Falcon CUSTOM Operating Manual

FALCON" CUSTOM
FALCON' STANDARD
OPERATING GUIDE
WARNING: TO PREVENT ELECTRICAL SHOCK OR PRE HAZARD, DO NOT EXPOSE THIS APPLANGE TO RAIN OR MOISTURE ]
BEFORE USING THS SPPLINGE. READ BACK COVER FOR FURTHER WARNIKGS.
FALCON™ CUSTOM FEATURES:
Poplar Body w/Carved Figured Maple Top
Bllaminated Figured Maple Neck
wiRosewood Fingerboard
22 Nickel Silver Frets
42" Fingerboard Radius, 254" Seale
Throo HRS (Hum Reducing System)
Frequency Tailored Pickups
'One Master Volume/One Master Tone Control
Five-Position Pickup Selector Switch
Powerbend II Tremolo w/Graphite Saddies
Locking Machine Heads/Graphlon™ Topnut
All Gold Hardware
FALCON™ STANDARD FEATURES:
Solid Poplar Body
Bilaminated Figured Maple Neck
'wiRosewood Fingerboard
22 Nickel Silver Frets
12" Fingerboard Radius, 25%" Scale
3HRS (Hum Reducing System) Frequency
Tañored Pickups
One Master Volume/One Master Tone Control
Five-Position Pickup Selector Switch
Power Bond Il Tremolo w/Graphite Saddles
Locking Machine Heads
Graphion™ Topnut
FALCON™ CUSTOM FALCON™ STANDARD
i
+
a
CONTROLS:
1. Volume Control: The volume control acts as a master
volume in that it controls the total signal level delivered
from the pickup to the output jack. Rotating the control
knob clockwise will increase volume; rotating counter-
clockwise will reduce volume.
Tone Control: The tone control, like the volume control,
operates as a master control. Rotating clock-
wise will result in more treble (high frequencies) and a
brighter tonality. Rotating counterclockwise will result
in less treble and a "bassier" type sound.
3. Pickup Selector Switch: This five-position switch allows
selection of any individual pickup, or two combinations
of multiple pickups. The available selection possibilities
are as follows:
First Position (Toward the neck) Selects cutput of neck
pickup only.
Second Position (One click back) Selects output of
neck and center pickups.
ition (Center) Selects output of center pickup
Fourth Position (One click back of center) Selects
output of center and bridge pickups.
Fifth Position (Toward bridge) Selects output of bridge
pickup only.
NOTE:
CARE MUST BE TAKEN TO MAINTAIN: ADEQUATE
CLEARANCE BETWEEN THE PICKUPS AND STRINGS.
INADEQUATE CLEARANCE WILL RESULT IN LOSS OF
SUSTAIN AND POSSIBLE STRING BUZZING WHEN
PLAYING ON THE UPPER FRETS.