Table of Contents
Advertisement
4. Troubleshooting
4-1-7. No Video (Component)
Symptom
Audio is normal but no picture is displayed on the screen.
-
Check the Component source
-
Major
Check the chelsea.
-
checkpoints
This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected.
-
5
2
Diagnostics
Caution
Make sure to disconnect the power before working on the IP board.
4-16
Power indicator LED is off.
Lamp(Backlight) on, no video ?
Yes
Check the component source and
check the connection of component
cables(Y,Pb,Pr)?
Yes
Does the component data appear at pin
COMP1_Y, COMP1_PB, COMP1_PR(Comp/
Y, Pb, Pr)?
Yes
Does the digital data appear at
TP-260_TXCLK+, 260_TXCLK- ?
Yes
Check the LVDS cable?
Check the T-Con B'd?
Replace the LCD panel?
No
Check a set in the 'Stand-by mode'
No
Input the component source properly.
Check CN701.
No
Change the Main Assy.
Check IC1102(SX1)
No
Change the Main Assy.
No
Please, Contact Tech support.
Advertisement
Table of Contents
