3 Disassembly and Reassembly
3-2 Reassembly
Reassembly procedures are in the reverse order of disassembly procedures.
3-2
6. Remove 14screws from the MAIN board,
power and lift up the board.
7. Remove 14 screws from the BRKT.
(see illustrations)
8. Remove 10 screws from the Ass'y chassis.
(see illustrations)
9. Dissconnect speaker cable, power cable and
fuction cable from the shield. Remove 8
screws from the side BRKT.
(right/left, see illustrations)
10. Remove 6 screws from the Ass's chassis.
(top/bottom)
This picture is panel.
LT-P468W