Advertisement
Quick Links
DMC-LX7P
Model No.
DMC-LX7PC
DMC-LX7PU
DMC-LX7EB
DMC-LX7EE
DMC-LX7EF
DMC-LX7EG
DMC-LX7EP
DMC-LX7GC
DMC-LX7GD
DMC-LX7GH
DMC-LX7GK
DMC-LX7GN
DMC-LX7GT
DMC-LX7SG
Colour
(K)...........Black Type
(W)..........White Type (except PU/EB/EE/EF/EG/EP)
© Panasonic Corporation 2012 Unauthorized copy-
ing and distribution is a violation of law.
ORDER NO. DSC1208031CE
B26
Digital Camera
Advertisement
Related Manuals for Panasonic Lumix DMC-LX7P
Summary of Contents for Panasonic Lumix DMC-LX7P
- Page 1 Digital Camera DMC-LX7P Model No. DMC-LX7PC DMC-LX7PU DMC-LX7EB DMC-LX7EE DMC-LX7EF DMC-LX7EG DMC-LX7EP DMC-LX7GC DMC-LX7GD DMC-LX7GH DMC-LX7GK DMC-LX7GN DMC-LX7GT DMC-LX7SG Colour (K)...Black Type (W)..White Type (except PU/EB/EE/EF/EG/EP) © Panasonic Corporation 2012 Unauthorized copy- ing and distribution is a violation of law.
-
Page 2: Table Of Contents
TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure. 1)--------3 1.4. How to Discharge the E.Capacitor on Flash P.C.B.----------------------------------------------------------4 2 Warning --------------------------------------------------------------5 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices ----------5 2.2. -
Page 3: Safety Precautions
1 Safety Precautions 1.1. General Guidelines 1.3. Leakage Current Hot Check (See Figure. 1) 1. IMPORTANT SAFETY NOTICE There are special components used in this equipment 1. Plug the AC cord directly into the AC outlet. Do not use which are important for safety. These parts are marked by an isolation transformer for this check. -
Page 4: How To Discharge The E.capacitor On Flash P.c
1.4. How to Discharge the E.Capacitor on Flash P.C.B. CAUTION: 1. Be sure to discharge the E.Capacitor on FLASH P.C.B.. 2. Be careful of the high voltage circuit on FLASH P.C.B. when servicing. [Discharging Procedure] 1. Refer to the disassemble procedure and remove the necessary parts/unit. 2. -
Page 5: Warning
2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. The following techniques should be used to help reduce the incidence of component damage caused by electrostatic discharge (ESD).