Advertisement
1. TLD HB (5.0-8.0:1) Lens Kit
Image 1-2
Move the handle of the lens anchor system to the left
Image 1-3
Take the lens out of the lens block
1.3 Installing the new lens
What has to be done?
This new lens has to be installed on the SLM series projector.
Necessary Tools
No tools necessary.
W
ARNING
How to install the new lens?
To install the lens, follow the next procedure:
1. Take the lens assembly out of its packing material and remove the lens caps on both sides.
2. Move the handle (A) of the lens anchor system to the right. (image 1-4)
4
:
Risk of personal injury. Instructions for lens installation must be followed thoroughly.
Download from Www.Somanuals.com. All Manuals Search And Download.
R5976666 TLD HB (5.0-8.0:1) LENS KIT 22/12/2004
Advertisement
