Table of Contents
Advertisement
| KV-M1400/M1401
RM-841
(2) Dynamic Convergence Adjustment
3.
Move the deflection yoke for best convergence as shown below.
Preparation:
4.
Tighten the deflection yoke screw.
¢
Before starting perform Horizontal and Vertical staticconvergence
5.
Install the deflection yoke spacers.
Adjustment.
1.
Slightly loosen deflection yoke screw.
2.
Remove deflection yoke spacers.
3-3. FOCUS
Adjust FOCUS so that the whole screen is in best focus.
(3) Screen-corner Convergence
Affix a Permalloyass'y
corresponding tate
misconverged areas
a-d: screen-corner
misconvergence
Permalloy assembly
—15—
Advertisement
Table of Contents
