Vcr Status Display Options; Vcr Status Displays - Zenith VRS428 Operating Manual

P A G E 1 4 C O N T R O L S A N D D I S P L AY S

VCR Status Displays

On-Screen
displays tell
you the
status of the
Current mode of operation
tape inserted
(STOP, PAUSE, RECORD, PLAY, etc.)
and VCR
and audio format of tape, where
functions.
Play=HI-FI or NORMAL (No display)
Tape Speed
EP=Extended Play
LP=Long Play
SP=Standard Play
Current date, day, and time
VCR Status Display
The VCR Status Display appears on the TV when a
VCR function starts, like when you change a
channel or select a different VCR mode. For
example, pressing STOP while the VCR is in PLAY
mode shows STOP in the display. Press ENTER on
the remote at any time (except Special Effect
Playback mode; SLOW, STILL etc.) to see the Status
Display.
Note:
If the VCR Status Display does not appear on the
TV screen, check the ON-SCREEN DISPLAY option
on the SETUP menu. Select ON to see the display.
See "VCR Menu Operations" section for details.
PLAY HI-FI VCR CH
SP
15 MON
7:17 AM
Typical VCR Status Display
M-1:35:45
Tape Counter Position
Current CH (Channel) selected
by using tuner in VCR
11
Audio format of signal
ST/SAP
received by VCR tuner:
STEREO, MONO or ST/SAP
Real-time tape counter
M-1:35:45
M = Counter Memory is active
– = Tape is rewound past index
on TV
mark.
1:35:45 = Length of tape (in time)
1 = 1 hour
35 = 35 minutes
45 = 45 seconds
REM 1:35
Tape Time Remaining

VCR Status Display Options

When the Status Display appears, press ENTER
repeatedly to see abbreviated displays, as follows:
1. Press ENTER to see Status Display.
2. Press ENTER a second time to show only the
tape counter position.
3. Press ENTER a third time to show only the tape
time remaining.
4. Press ENTER repeatedly until all displays are
removed.