Playing Tapes - Zenith VRC420 Operating Manual

P A G E 2 4 O P E R AT I O N

Playing Tapes

This page explains how to use the remote to play tapes on your VCR.
Auto/Manual Tracking Adjustment
Your VCR adjusts tracking automatically when you play a tape. If
the tape was recorded on a different VCR, streaks (video noise)
may appear. While the tape is playing, press TRK (
adjust the tracking manually.
Real-Time Tape Counter
Press ENTER twice to keep the tape counter on the TV screen.
Press ENTER repeatedly to remove all displays. The counter
resets to 0:00:00 when you insert a cassette or when a tape is
rewound to its beginning.
Pause/Slow-Motion Video
(While in play mode) Press PAUSE for still video. While in still
video mode, press F FWD or REW for slow motion. Press F FWD or
REW to control slow speed during slow motion. Press PLAY to
resume normal tape playing.
Tape Rewind and Fast Forward
(While in Stop mode) Press and release REW or F FWD (Fast
Forward), as desired. Press STOP when tape reaches desired
location.
Reverse/Forward Search
(While in Play mode) Press and release REW or F FWD, as
desired. Press PLAY to resume normal tape playing.
CM Skip (Commercial Skip)
(While in play mode) Pressing CM SKIP on the remote skips
commercials or other program material. Pressing 1, 2, 3, or 4
times skips 30, 60, 90, or 120 seconds, respectively. CM SKIP
skips a full 120 seconds of commercials in a few seconds, then
resumes normal playback.
M L
/ ) to
POWER
ENTER
PAUSE
REW (Rewind)
PLAY
power
eject
ch
menu
F FWD
enter ch quit
(Fast Forward)
STOP
rew f fwd
play
rec/itr
1 2 3
CM SKIP
4 5 6
7 8 9
tv/vcr cm skip
0
EZ watch trk
memory sp/ep
TRK(Tracking)
(M/L)