Channel Label - Zenith IQD61W20 Operating Manual

Channel Label

Chooses preset labels for your channels.
Use Channel +/- on your remote control in the CH Label
menu to select a channel for labeling, and choose an
appropriate label for your channel by pressing (Enter) to
set the label to the selected channel.
Press the MENU button on the remote
1
control, then use the UP/DOWN arrow
button to select the Setup menu.
Press ENTER or the RIGHT arrow button
2
to access the Setup menu.
Use the UP/DOWN arrows to select CH
3
Label.
Press ENTER or the RIGHT arrow to
4
access the CH.Label screen.
You will now see a screen filled with
5
Labels and a preview screen. Press chan-
nel UP/DOWN on your remote to select
the channel to Label.
Use the UP/DOWN and LEFT/RIGHT
6
arrows to select the appropriate label for
the channel and press ENTER to set the
Label to the selected channel.
Repeat steps five and six until all chan-
7
nels are Labeled.
Press EXIT to save and return to TV view-
8
ing.
P A G E 3 4
tv vcr cable dvd sat
mode
light power
source
video front
tv
rgb
comp1 comp2
1 2 3
4 5 6
7 8 9
0
enter
mute
pg up
pg dn
vol
ch
vcr+ freeze flashbk pip
guide
surf
menu info
1
exit
record stop skip
pause rew
play
2/4/6
ratio
1/2/3/4/5/6
2/4/6
8
ff
206-3674