Zenith IQA32M46W Operating Manual page 43

Programming the MBR Trakball Remote
Select the equipment you want to
1
program, then turn to pages 44-45 to
find the programming code appropriate
for the type and brand of equipment.
Make sure the equipment is turned on.
Point the MBR Trakball remote at the
2
piece you're programming, and press
MUTE and FLSHBK at the same time.
Hold until one of the mode indicator
LEDs lights.
3
Use the MODE Right/Left button
to select the appropriate mode for
your equipment.
With the Number Keypad, enter the
4
three digit code you found in step 1.
If the code is accepted, the mode
indicator LED will blink three times.
If it is not accepted, the LED will
not blink.
NOTE: The TV and VCR modes will only
accept codes for those types of prod-
ucts. The AUX 1, AUX 2, and Cable
modes will accept codes for any kind
of product.
Push the POWER button to turn off the
5
equipment. If nothing happens, repeat
the process from step 1, and try the
next code number.
To get out of Programming before
you enter a code, just press the
QUIT button on your remote.
3357-o
O P E R AT I O N
Indicator lights
2
pip
rew
P R O G R A M M I N G T H E R E M OT E
5
cable
3
mode
surf
2
5
4
8
0
play
ffwd
stop
P A G E 4 3
Operate
all of your
home theater
and stereo
hardware
with the
MBR Trakball.