Table of Contents
Advertisement
en Customer Service
Transporting the appliance
To avoid damage to the appliance,
empty it before transporting.
Note: Always transport the dish-
washer upright to prevent residual
water getting into the machine's con-
trols and damaging the appliance.
Remove tableware from the appli-
1.
ance.
Secure loose parts.
2.
"Switch on the appliance."
3.
→ Page 34
Select the programme with the
4.
highest temperature.
→ "Programmes", Page 20
"Start the programme." → Page 34
5.
To drain the appliance, terminate
6.
the programme after approx.
4 minutes.
→ "Terminate programme",
Page 35
"Switch off the appliance."
7.
→ Page 35
Turn off the water tap.
8.
To empty the residual water out of
9.
the appliance, detach the supply
hose and let the water drain out.
Disposing of old appliance
Valuable raw materials can be re-
used by recycling.
WARNING
Risk of harm to health!
Children can lock themselves in the
appliance, thereby putting their lives
at risk.
With redundant appliances, unplug
▶
the power cord. Then cut through
the cord and damage the lock on
the appliance door beyond repair
so that the appliance door will no
longer close.
58
Unplug the appliance from the
1.
mains.
Cut through the power cord.
2.
Dispose of the appliance in an en-
3.
vironmentally friendly manner.
Information about current disposal
methods are available from your
specialist dealer or local authority.
This appliance is labelled in ac-
cordance with European Direct-
ive 2012/19/EU concerning
used electrical and electronic
appliances (waste electrical and
electronic equipment - WEEE).
The guideline determines the
framework for the return and re-
cycling of used appliances as
applicable throughout the EU.
Customer Service
Customer Service
Detailed information on the warranty
Customer Service
period and terms of warranty in your
country is available from our after-
sales service, your retailer or on our
website.
If you contact Customer Service, you
will require the product number (E-
Nr.), the production number (FD) and
the consecutive numbering (Z-Nr.) of
your appliance.
The contact details for Customer Ser-
vice can be found in the enclosed
Customer Service directory or on our
website.
Product number (E-Nr.), pro-
duction number (FD) and con-
secutive numbering (Z-Nr.)
You can find the product number (E-
Nr.), the production number (FD) and
the consecutive numbering (Z-Nr.) on
the appliance's rating plate.
The rating plate is located inside the
appliance door.
Advertisement
Table of Contents
