Table of Contents
Advertisement
Rear Panel
1
1. 5.1CH ANALOG AUDIO OUT
JACKS
- Connect to an amplifier with 5.1ch analog input
jacks.
2. VIDEO OUT JACK
- Use a video cable to connect to the Video
input jack on your television.
- The Video Output in Setup Menu must be set
to Component(I-SCAN).
3. COMPONENT VIDEO OUT
JACKS
- Use these jacks if you have a TV with
Component Video in jacks. These jacks pro-
vide P
, P
and Y video.
R
B
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan
settings in the TV's menu system.
- See pages 27-28 to get more information on how to use the setup menu.
28-29
4
2
3
- If Component(P-SCAN) Video Output is select-
- If Component(I-SCAN) Video Output is select-
4. DIGITAL AUDIO OUT JACKS
- Use coaxial digital cable to connect to a com-
- Use coaxial digital cable to connect to an A/V
Antenna In / Antenna Out
5.
- Connect antenna cables.
ed in Setup Menu, progressive scan mode will
work.
ed in Setup Menu, interlaced scan mode will
work.
patible Dolby Digital receiver.
Amplifier that contains a Dolby Digital, MPEG2
or DTS decoder.
5
7
Advertisement
Table of Contents
