Table of Contents
Advertisement
No picture &
No sound
Picture OK &
No sound
The remote control
doesn't work
No or Poor color
or Poor picture
No output from one
of the speakers
Strange sound
from the Monitor
42
Troubleshooting check list
• Check whether the Monitor is turned on.
• Check the power cord.
• Plug another product's power cord into the wall outlet where
the Monitor's power cord was plugged in.
• Press the VOLUME (
• Check to see if there is any object between the Plasma
Display and the remote control causing obstruction.
• Check to see if the batteries are installed with the correct
polarities. (Refer to p.24)
• Replace new batteries. (Refer to p.24)
• Select
COLOR
TURE
menu and press the VOLUME (
• Keep a certain distance between the Monitor and the VCR.
• Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the
screen gets dark.)
• Adjust
BALANCE
SOUND
menu. (Refer to p.36)
• The reason strange sound comes from the Monitor when turn-
ing the Monitor on or off is due to the signals being input or
output to the Monitor.
This strange noise does not mean that the Monitor is faulty.
G
) button.
in the
USER CONTROL
in the
USER CONTROL
mode of the
PIC-
G
) button.
mode of the
Advertisement
Table of Contents
