Extra Options And Functions - LG T1785NEHTE Owner's Manual

Extra Options and
Functions
You can use the extra options and functions on
some programmes to customize the cycle.
Customising a Washing
Programme
Each programme has default settings that are
selected automatically. You may also customise
these settings using these buttons.
Air Dry
When you select Air Dry, you can reduce the drying
time by minimizing the moisture that remains
within the clothes.
• Press the Air Dry button to select this option.
NOTE
• Always keep the clothes amount to 2 kg or less
and make sure to redistribute the clothes evenly.
• Select 60 minutes for cotton clothes and 120
minutes for synthetic fibre clothes for effective
moisture reduction.
Tub Dry
Use this option when you want to dry the empty
tub after a wash.
1
Remove your clothes after a wash.
2
Press the POWER button.
3
Press the Air Dry button to select the Tub Dry.
4
Press the START/PAUSE button.
Temp.
Use this option to change water temperature.
• Press the Temp. button until the desired setting
is lit.
Water
This appliance detects the amount of laundry
automatically, then sets the water level. However,
manually increasing the water level may be
required and recommended to avoid linting and
unbalanced errors when the load is bulky but
lightweight.
• Press Water option to adjust water level.
• When you select a wash programme, the water
level will be shown on the control panel.
• When water level is automatically detected, it
may differ depending on the amount of laundry
even though the same water level is indicated on
the control panel.
Wash
Adjusting the wash time setting modifies the cycle
times and/or wash actions.
• Press Wash button until the desired wash time is
selected.
Rinse
Use this option to change the number of rinses.
• Press Rinse button to change the number of
rinses.
• When the Rinse option is selected,
• If selecting the maximum number of rinses, then
this option is deactivated.
NOTE
• This option is only available on some
programmes.
Spin
Use this option to change the spin strength. When
you press the START/PAUSE button after selecting
this option, the remaining time is indicated on the
display.
Using Basic Options
Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the POWER button.
2
Select a washing programme.
OPERATION
23
l icon is lit.