Table of Contents
Advertisement
DRIVING
4. Select Road Departure Mitigation Setting.
Important Safety Reminder
n
The RDM system has limitations. Over-reliance on it may result in a
collision. It is always your responsibility to keep your vehicle within the
driving lane.
Collision Mitigation Braking System
Can assist you when there is a possibility of
your vehicle colliding with a vehicle or a
pedestrian detected in front of yours. The
™
CMBS
is designed to alert you when a
potential collision is determined, as well as
to reduce your vehicle speed to help
minimize collision severity when a collision
is deemed unavoidable.
Alert Stages
n
The system has three alert stages for a possible collision. Depending on the
™
circumstances or CMBS
settings, CMBS
stages before initiating the last stage.
Stage 1:
Visual and audible warning.
Stage 2:
Visual and audible warning, light brake application.
Stage 3:
Visual and audible warning, strong brake application.
Changing Settings
n
1. From the Home screen, select Settings..
2. Select Vehicle Settings.
3. Select Driver Assist System Setup.
4. Select Forward Collision Warning Distance.
Turning the System On or Off
n
106 |
™
™
(CMBS
)
™
may not go through all of the
™
Press and hold the CMBS
OFF button.
A beep sounds and a message appears
in the Multi-Information DisplayDriver
Information Interface. The CMBS
indicator appears when the system is
off.
Important Safety Reminder
n
CMBS is designed to reduce the severity of an unavoidable collision. It does
not prevent collisions nor stop the vehicle automatically. It is still your
responsibility to operate the brake pedal and steering wheel appropriately
according to the driving conditions.
™
*1
LaneWatch
Allows you to check the passenger side rear areas displayed on the audio/
information screen when the turn signal is activated to the passenger's side.
™
*1 - If equipped,
DRIVING
| 107
Advertisement
Table of Contents
