Honda ODYSSEY 2022 Owner's Manual page 92

Indicator Name
Automatic Brake
Hold System
Indicator
U.S.
Automatic Brake
Hold Indicator
Canada
Malfunction
Indicator Lamp
On/Blinking
• Comes on when the automatic
brake hold system is on.
• Comes on when the automatic
brake hold is activated.
• Comes on when you set the
power mode to ON, and goes off
when the engine starts, or after
several seconds if the engine did
not start. If "readiness codes"
have not been set, it blinks five
times before it goes off.
• Comes on if there is a problem
with the emissions control system.
• Blinks when a misfire in the
engine's cylinders is detected.
Explanation
2 Automatic Brake Hold P. 642
2 Automatic Brake Hold P. 642
• Readiness codes are part of the on board
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 765
• Comes on while driving - Have your
vehicle checked by a dealer.
• Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the engine for 10 minutes
or more, and wait for it to cool down.
Then, take your vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 740
uuIndicatorsu
Message
—
Continued 91