Yamaha EC-03 2012 Owner's Manual page 24

INSTRUMENT AND CONTROL FUNCTIONS

When the battery level indicator
shows less than two segments, if
the vehicle is exposed to higher
1
temperatures, "COOL" may flash
and the riding speed may be re-
duced.
2

When riding on a long uphill
stretch, "HEAT" may flash and the
3
riding speed may be reduced.

When riding on a long uphill
stretch, the temperature of the
4
control unit may rise and "HEAT"
may flash. If you ride continually,
5
the operating status indicator
"RUN" goes off to protect the con-
6
trol unit and further riding may be
impossible, but this is not a mal-
function.
7
The vehicle can be ridden when the op-
8 erating status indicator "RUN" appears
in the display, however riding speed
may be reduced. This is due to reduced
9
electric output from the battery be-
cause of high battery temperature.
1
1. Operating status indicator "RUN"
2. Temperature indicator "HEAT"
If the battery level indicator shows less
than two segments, or the electric out-
put from the battery is limited because
of the battery temperature, the riding
power is substantially reduced, but this
is not a malfunction.
When the battery and control unit have
reached their normal operating temper-
ature and the operating status indicator
"RUN" appears, the temperature warn-
ing display automatically changes back
to the tripmeter/odometer display.
If the operating status indicator "RUN"
does not appear, the vehicle cannot be
ridden.
4-5
2
1. Tripmeter/odometer
Turn the key to "OFF" and allow the
battery and control unit to cool down
before riding again.
TIP
When the operating status indicator
"RUN" disappears and riding cannot be
continued, the temperature warning
display can be canceled by turning the
key to "OFF" and then back to "ON" af-
ter the battery and control unit have
cooled down.
WARNING
Before pushing or moving the
EC-03, be sure to turn the key to
"OFF". The vehicle may suddenly
1
EWA15631