Table of Contents
Advertisement
PC Cards
Label-side up
2
Installing/Removing the PC Card
Installing a PC Card
Slide the PC Card in until it snaps into place. Refer to the manual for each
card on how to install the card (insertion is typically label-side up).
CAUTION
In the case of a PC Card to connect a peripheral device (SCSI,
IEEE 1394, etc.), first connect the peripheral device to the card, and
then insert the card after switching ON the device.
When inserting a card, do not force the card in if difficulty is encoun-
tered. You may damage the slot, making it impossible to remove the
card.
Removing a PC Card
CAUTION
Do not remove a PC Card while your computer is in the standby or
hibernation mode.
Double-click
PC Card, then press [Stop].
Follow the on-screen instructions.
(When removing a PC Card after turning off the computer, this step is
not need.)
2
Press the button, and then press the button again.
Slide the PC Card out.
(Windows 2000 :
) on the task tray and select the
39
Advertisement
Table of Contents
